Efficient tree stump removal with 4 in 1 bucket on a tractor
In this video tutorial I demonstrate how to remove a tree stump with a 4 in 1 bucket on a tractor front end loader. If you need instruction on how to operate a 4 in 1 bucket mounted on a front loader on a tractor then this video will help: https://youtu.be/7vuSf4wMHDg
Firstly I remove the top of the dead, dry tree by clamping it in the jaws of the 4 in 1 bucket and reversing until it snaps off. Then I grip the stump un the jaws of the 4 in 1 bucket and rock it back and forth by alternate reversing and forward motion, taking care not to place excess strain on the 4 in 1 bucket and front loader. The tree stump eventually becomes loose enough to lift it out of the ground with roots still attached. This is done by raising the frontend loader arm of the tractor. Then by adjusting the grip with the 4 in 1 bucket the tree stump can be carted away.
Video captions
Remove a tree stump with 4 in 1 bucket on tractor frontend loader
If you would like to learn how to operate a 4 in 1 bucket watch the video on top of screen now
That’s the top of the tree gone
Now to remove the tree stump
Grip tree stump in 4 in 1 and rock back and forth
Dentists watching this will recognise this action
Increased leverage by gripping stump higher up
Stump now loose can lift up out the ground
Reposition grip with 4 in 1 for transporting
Job done, real time less than 4 minutes, too easy
How to operate 4 in 1 video card at 00:54
The video demonstration may be viewed here:
You may also find this video useful:
Comments are most welcome, try this and send us some feedback☺️ Why not visit our channel and browse through our other videos? http://www.youtube.com/c/AnnErasmus
Short Disclaimer/disclosure: My videos/articles are for informational and educational purposes only, you should consult with a professional before attempting anything seen or done in my videos/articles. Please read full disclaimer here: https://basiclowdown.com/disclaimer-disclosure-page/